Some screenshots:
wolf:~# grep Proc /proc/cpuinfo
Processor : XScale-80219 rev 0 (v5l)
wolf:~# uname -rm
2.6.30-1-iop32x armv5tel
wolf:~# fdisk -l /dev/md0
Disk /dev/md0: 2250.5 GB, 2250460889088 bytes
2 heads, 4 sectors/track, 549428928 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000
wolf:~# cat /proc/mdstat
Personalities : [raid1] [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[3] sdc1[2] sdb1[1] sda1[0]
2197715712 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]
5 comments:
Hi,
just a quick question: are the LEDs of the hard drives on your NAS active?
There don't seem to be any modules for the LEDs for the SS4000 in the default kernel.
Regards
Willem
Indeed, only the LED's at the bottom of the box are operational.
paul
Hello, Paul
could you post "hdparm -Tt /dev/md0" from your box? I've got extremely slow system with SS4000 and 2.6.32-5-iop32x armv5tel kernel ...
Thank you in advance
wolf:~# uname -a
Linux wolf 2.6.30-1-iop32x #1 Sat Jul 18 15:28:16 UTC 2009 armv5tel GNU/Linux
wolf:~# hdparm -tT /dev/md0
/dev/md0:
Timing cached reads: 122 MB in 2.01 seconds = 60.69 MB/sec
Timing buffered disk reads: 104 MB in 3.03 seconds = 34.38 MB/sec
With newest Debian kernel:
wolf:~# hdparm -tT /dev/md0
/dev/md0:
Timing cached reads: 128 MB in 2.00 seconds = 63.99 MB/sec
Timing buffered disk reads: 106 MB in 3.02 seconds = 35.15 MB/sec
wolf:~# uname -a
Linux wolf 2.6.32-5-iop32x #1 Wed Oct 20 03:57:21 UTC 2010 armv5tel GNU/Linux
Post a Comment